TechTidBit - Tips and advice for small business computing - Tech Experts™ - Monroe Michigan

Brought to you by Tech Experts™

Wireless

Tips To Improve Your Wireless Signal Strength

If Windows notifies you about a weak signal, it probably means your connection isn’t as fast or as reliable as it could be. If you’re looking to improve the signal for your wireless network, try some of these tips.

Position your wireless router in a central location
When possible, place your wireless router in a central location in your office. If your router is against an outside wall, the signal will be weak on the other side of your office.

Move the router away from walls and metal objects
Metal, walls, and floors will interfere with your router’s wireless signals. The closer your router is to these obstructions, the more severe the interference, and the weaker your connection will be.

Replace your router’s antenna
The antennas that came with your router are omni-directional, meaning they broadcast in all directions. If the router is near an outside wall, half of the wireless signals will be sent outside the building, and much of your router’s power will be wasted. Upgrade to a hi-gain antenna that focuses the wireless signals only one direction. You can aim the signal in the direction you need it most.

Add a wireless repeater
Wireless repeaters extend your wireless network range without requiring you to add any wiring. Just place the wireless repeater halfway between your wireless access point and your computer, and you’ll get an instant boost to your wireless signal strength. Check out the wireless repeaters from ViewSonic, D-Link, Linksys, and Buffalo Technology.

Increase Your Wireless Network Signal Strength

If you’ve installed a wireless network at your home or business, you may find your goal of “less desk, more freedom” is hampered by low signal strength, interference, and dropped connections.

You may also discover that your wireless network covers only half of your business, or that the signal barely seems to penetrate into the next room.

Insufficient range is a common problem for many wireless networks, but there are ways to extend your coverage area into the places you need it most.

1. Center your router. Setting up a wireless network is all about location. Unfortunately, it’s hard to know exactly what your coverage area will be before you install the equipment.

If possible, place your wireless router in the center of the area you wish to cover. The omnidirectional antennas on most routers radiate in a doughnut-shaped pattern around the pole. If your router is located in a corner of your office building, much of that radiation pattern will fall outside your home. Also, consider mounting your router high on a wall or ceiling far away from furniture and shelving that can impede or block Wi-Fi signals.

2. Add antennas or repeaters. You can use a wireless repeater to extend your range. Repeaters receive data packets and retransmit them at full power. Repeaters can also be difficult to install, especially if you’re new to networking. Keep in mind that repeaters tend to rely on proprietary solutions that are vendor specific and work only when you use the same brand of router and repeater.

Still, a repeater can significantly increase the range of your wireless network and is well worth considering if you want to add a few rooms to your coverage area.